All Available Colours

X
On-screen colours may vary according to different screen calibrations so we always recommend purchasing a sample pot first if colour is critical and always applying a test area before painting.
Need help?

01604 621150

from 8:30am-5:00pm

Bradite DP5 Polyutherane Semi-Gloss Floor Paint

Bradite DP5 Polyutherane Semi-Gloss Floor Paint
Excl. VAT: £12.90 Incl. VAT: £15.48
- £33.83 - £40.60

Availability: In stock

+ FREE DELIVERIES ON ALL ORDERS OVER £49.99*

* Required Fields

Excl. VAT: £12.90 Incl. VAT: £15.48
product information

Details

Top quality polyurethane resin based semi-gloss finish paint with excellent wash and wear resistance, for concrete and wooden floors subject to light to medium traffic.

technical specifications

Details

Brand Bradite
Pack 5lt
Finish Semi Gloss
No Of Coats 2x
Thinners Bradite Thinner TW35
Surface Dry 2 Hours
Minimum Overcoat Time 16 Hours Minimum
Minimum Application Conditions Down to 10 oC (but must be 3 oC above dew point)
Time To Light Traffic 24 hours minimum, after final coat
Full Cure 7 Days
MPN DP5
overview

Details

  • • Tough, hard-wearing film.
  • • For use on concrete, wooden and suitable primed steel floors.
  • • Prevents dusting of concrete floors.
preparation

Details

Substrate Preparation

Substrates should be dust free and completely dry before coating.

When painting concrete it is vital to ensure that the substrate is completely dry and free of laitance.

Power floated, shiny or unpainted non porous concrete floors should be thoroughly vacuum blast cleaned to a roughness profile of 30-50 microns, or acid etched using Bradite TA37, or primed using Bradite Floor Primer ES40.

Please consult the product data sheet for more details. 

Cleaning

High pressure water cleaning should be utilised to remove all loose and flaking paint and contamination back to a sound substrate.

Bradite TD39 industrial strength detergent should be used if necessary to remove all grease and oil. 

Abrasion

Intact areas of existing coatings should be roughened by abrasive manual or disc rubbing and feathered back to a sound coating edge.

Cracks and pits should be filled using a suitable screed or mortar before painting. 

Application

Details

Method Of Application

Brush and Roller 

supplied ready for use. Thin, if required, with 0 - 5% Bradite Thinner TW35.

Conventional Air Spraying

Thin with 10 - 20% Bradite Thinner TW35 as required, tip size - 2.0mm, tip pressure 60psi (0.4MPa) approximately.

Airless Spraying

Thin with 0 - 15% Bradite Thinner TW35 as required, tip size - 18 thou (0.46mm) approximately, tip pressure - 2100 psi (15MPa) approximately. 

aftercare

Details

While the floor will take light foot traffic after overnight drying, full cure may take 4 days at 20⁰C and should not be subject to heavy traffic for at least 48 hours.

Please note that drying/curing times will vary depending on film thickness, temperature and relative humidity. Bradite Floor Paint DP5 is suitable for use in domestic and light commercial garages.

In the first seven days after application, vehicles should be left outside to allow tyres to cool down (especially after long journeys) to help prevent hot tyre pick up.

Spills of petrol and diesel should be cleaned up as soon as possible to reduce the danger of slip and to prevent discolouration of the floor paint.

Brake fluid is highly aggressive and will attack most floor paints on contact – use drip/capture pans when working on brake systems to prevent permanent damage to the floor paint finish.

Datasheets

Details

Customer reviews