All Available Colours

On-screen colours may vary according to different screen calibrations so we always recommend purchasing a sample pot first if colour is critical and always applying a test area before painting.
Need help?

01604 621150

from 8:30am-5:00pm

Crown Trade White Gloss

Crown Trade White Gloss
Excl. VAT: £11.10 Incl. VAT: £13.32
- £31.33 - £37.60

Availability: In stock


* Required Fields

Excl. VAT: £11.10 Incl. VAT: £13.32
product information


A high quality decorative and protective finish for use over correctly prepared joinery and metal.

technical specifications


Application Brush , Roller
RecoatableTime 24 Hours
Spreading Rate Up to 12-15m sq,mtr per litre
Pack Size 1L, 2.5L, 5L
Touch Dry 6 Hours
MPN 5026954, 5026955, 5026956
GTIN 5010131010736, 5010131010729, 5010131010712


  • • For interior and exterior use
  • • Exceptionally hard wearing and flexible finish
  • • Excellent opacity and film build
  • • High gloss and colour retention
  • • Good flow properties


before using crown trade gloss


All surfaces must be suitably dry, and free from anything that will interfere with the adhesion of the materials to be applied.

Prior to painting the moisture should not exceed 18%. Remove grey and denatured surfaces by rubbing down with abrasive paper or by mechanical means and round sharp edges 1-3mm.

Organic growth must be removed and the areas treated with a Trade Fungicidal Solution.

Remove any defective putty glazing, clean and prime rebates, replacement putties must be allowed to form a hard skin. Treat knots with two thin coats of fresh knotting.

Fill any fixing holes, open joints and shallow surface defects with a Trade Ready Mixed Filler or a two pack proprietary wood filler.

Rub down with a suitable grade of abrasive paper.

Remove all dust.

Prior to painting the moisture should not exceed 18% wood moisture equivalent.

Prime with one coat of Wood Primer, or for hardwood, Aluminium Wood Primer. 

For more information please refer to Data Sheet



how to apply crown trade gloss

Stir well before use.

Apply by brush or roller to an even thickness (a fine, soft long filament bristle brush gives best results).

Maintain a wet edge.

On timber lay off in the direction of the grain.

NOTE: Our products are formulated to the highest quality, however recent changes made to meet the reduced solvent levels required by current legislation may in certain circumstances, such as lack of daylight, lead to white and very pale colours yellowing over time.



Customer reviews